2W PA for DLC Module

This PA-T602 power amplifier(PA) is a 2W linear power amplifier, designed for using with Sihid DLC module.

Features:

• Frequency band: 566~678MHz
• RF in: DLC module RF out(23±2dBm)
• RF out power: 2W(33~36dBm)
• PA-T602 Tx gain: 15dB±1.5, when used with DLC Module, set up the maximum RF power of DLC as 21~25 dBm, then the RF out power will be 33~36dbm. In the whole band of 566-678MHz, there are slight differences in gain at different center frequency, and the DLC module itself also has slight differences in RF output power at different center frequency. It is recommended to set the maximum output RF power of the DLC module to "22" when adding PA-T602 to work with DLC module.
• LNA gain of the receiving channel: 20dB±1
• Power in: DC12V~18V, minimum 1.5A@12V power current rating.
• Power consumption: 12V power supply, set the RF power of the DLC module to "22" and works as 1D4U mode and transmitting data at full load, the average operating power consumption of PA-T602 module itself at access node is 5-7W.
• Static current (without RF signal input): about 0.09A (12.3V input)
• Dimensions: 52.9*40.5*13mm(not including the connector outside of the case)
• Weight: 42g
• Impedance: 50ohm

Working together with DLC Module:

I/O

Heat dissipation

The back side of the PA module should be assembled to metal directlyand tightly to help heat dissipation. For optimal performance it isimportant to include adequate heat dissipation strategies thatincorporate a heat sink or fan into any designs that integrate thePA module.

PA-T602 overview.pdf